The routine maintenance of steel plate CNC plasma cutting machine is important

As a necessary cutting machine, steel plate CNC plasma cutting machine has been rapidly popularized in China, and the majority of enterprises have begun to use the plasma numerical control cutting machine for iron and steel plate production. It can be said that the use of steel plate plasma CNC cutting machine not only greatly improve the production efficiency of enterprises, but also can save a lot of manpower and materials. The use of plasma cutting machine for steel plate is undoubtedly icing on the cake for the vast number of small and medium-sized enterprises. When we use the steel plate plasma numerical control cutting machine Levy we create value, we can not ignore the maintenance and maintenance of it. If the equipment is not protected for a long time, there will be a series of problems over time.

1. The environmental humidity of plasma cutting machine is unbalanced. Industrial computer is composed of many electronic components of integrated circuits, its insulation is very sensitive to environmental humidity. Too much humidity is easy to make circuit boards short circuit and burn; too little humidity is easy to produce static electricity, but also break down some electronic components. Therefore, in daily production, we must strengthen the monitoring of environmental humidity.

2. The working surface of the plasma cutting machine of steel plate has a larger sense of vibration. During the production and operation of the equipment, the physical displacement such as dragging and vibration will produce very strong noise. The vibration brought by the equipment will cause strong damage to the disk, CD-ROM drive and floppy drive of the industrial control computer. If the industrial computer disk, CD-ROM, floppy drive problems, it will have an impact on the system, resulting in settings can not run normally.

3. Too much dust in the air. As a result of steel plate CNC plasma cutting machine cutting a large number of metal dust will penetrate into all parts of the equipment, coupled with the steel plate plasma numerical control cutting machine cutting a large number of long-term cutting, metal dust accumulation, will also cause a great burden on the operation of equipment. Therefore, we must ensure the cleanliness of the production workshop environment and clean up metal dust in time.

4. The guide rail of steel plate plasma numerical control cutting machine should be wiped and maintained regularly to ensure the normal operation of the machine. If there is a jam, it will lead to large fluctuations in the voltage of the power supply motor, easy to power failure.

5. Steel plate CNC plasma cutting machine control machine working time is too long. Maybe due to the production needs, some users'industrial control systems need to work for a long time, which brings huge load to the industrial computer operating system, and the internal temperature of the industrial computer is too high. In the environment of long-term high temperature operation, the components of the computer are in high temperature for a long time. If they are not cooled in time, they will be prone to aging and hard disk failure.

The above problems are steel plate CNC plasma cutting machine is not maintenance under the circumstances of frequent problems, so I hope that the majority of customers in the operation and use of attention to maintenance, may be many customers do not know how to maintain the iron and steel plate plasma CNC cutting machine, the following on the daily maintenance of the iron and steel plate plasma CNC cutting machine Maintenance, I and customers to explain in detail:

1. After work, equipment should be returned to the protection level, close the valve. The residual gas in the pipe should be exhausted and shut off the power supply.

2. If the handover system is implemented, the shift records should be kept in good condition.

3. We should carefully clean up the site and keep the work area clean and orderly.

4. The track does not allow people to stand, step on, lean on heavy objects, let alone impact, the track surface of each shift with compressed air after dedusting with gauze grease wipe the track surface. Keep the guide surface clean and clean at any time.

5. Oil on the transmission rack is cleaned every day with particles splashing on the rack.

6. Operators are only allowed to disassemble the cutting mouth, the rest of the parts can not be disassembled at will, the electrical junction box only allows the relevant personnel to open when overhaul.

7. If the equipment breaks down, the maintenance personnel should be promptly requested to deal with it. If the breakdown is serious, the equipment department should first report to the relevant personnel to organize a review and determine the maintenance plan. It is strictly forbidden to dismantle the machine privately.

In daily use, the daily maintenance of steel plate CNC plasma cutting machine is indispensable, and these small details can not be ignored for production needs.